Custom railings

Deck Railing Installation in Los Angeles

Quick answer: ION Builders installs cable, glass, aluminum and composite railings across Los Angeles and Ventura County, on decks, balconies, rooftops, stairs and hillside view decks. Every railing is built to California code, with guards at least 42 inches high and openings that a 4-inch sphere cannot pass through, and matched to your view, your deck and how much upkeep you want.

Licensed General Contractor (CSLB #1069085) · TrexPro Platinum builder · TimberTech Silver Pro contractor · Serving Los Angeles and Ventura County

Railings we install

Railing typeBest forUpkeepGood to know
Cable railingModern decks and open viewsCheck cable tension now and thenStrong end posts keep the cables tight
Glass railingThe clearest view and wind protectionClean the glassUses tempered or laminated safety glass
Aluminum railingLow-maintenance, strong and fire-safeVery littlePowder-coated in many colors
Composite railing (Trex, TimberTech)Matching a composite deckVery littleMatches the decking colors
Wood railingTraditional and craftsman homesClean and seal regularlyNatural look; more upkeep
Custom steel or mixed railingOne-of-a-kind designsDepends on finishDesigned for the space

Not sure which to pick? Read cable vs. glass railings: pros, cons and which is right for your LA deck.

Where we install railings

  • ●Deck railings for new and existing custom decks.
  • ●Balcony railings for homes, condos and apartment buildings. See balconies.
  • ●Rooftop railings that hold up to wind. See rooftop decks.
  • ●Hillside view railings that keep the view open. See hillside decks.
  • ●Stair railings and handrails for decks, porches and outdoor stairs.
  • ●Pool deck railings that keep the pool in view. See poolside decks.
  • ●Railing replacement for old, loose or low railings.

California railing code basics

  • ●Guard height: a guard is required where a walking surface is more than 30 inches above the ground below, and it must be at least 42 inches high on homes in California.
  • ●Openings: a 4-inch sphere must not pass through any opening, including between cables when they are pushed.
  • ●Stairs: guards on the open sides of stairs can be at least 34 inches high, measured from the stair nosings.
  • ●Handrails: stairs with four or more risers need a graspable handrail 34 to 38 inches high.
  • ●Strength: railings must resist the loads set by the code, which is why post spacing and how posts attach to the framing matter.
  • ●Glass: glass railings must use safety glass, and the code sets extra rules for glass panels that carry the load.

Local amendments can be stricter. ION Builders checks the rules for your city and handles the permit when one is needed.

How we install railings that stay solid

  • ●Strong posts. Posts are bolted or through-blocked into the framing, not just screwed to the surface.
  • ●Tight cables. Cable systems use sturdy end posts and are tensioned so they pass the 4-inch rule.
  • ●Clean glass. Glass panels are set level in posts, clamps or base shoes, with top rails where the design needs them.
  • ●Corrosion-resistant hardware near the ocean and pools.
  • ●Fire-zone options: aluminum, steel and glass railings are noncombustible.

What drives the price of a railing

ION Builders prices every railing after a site visit, because these factors change the total:

  • ●Railing type: cable, glass, aluminum, composite, wood or custom steel.
  • ●Length and number of corners, posts and stairs.
  • ●Mounting: top-mounted, side-mounted (fascia) or base shoe.
  • ●Framing repairs needed to anchor posts.
  • ●Removal of an old railing.
  • ●Permits, when required.

Our railing process

1

Free site visit

we measure and look at the deck, view and framing.

2

Design and materials

we help you choose the railing, finish and mounting.

3

Written proposal

a clear, itemized price and schedule.

4

Permits

we handle them when they are required.

5

Installation

posts, infill, top rails and any stair handrails.

6

Final check and walkthrough

Why homeowners choose ION Builders for railings

  • ●Licensed general contractor (CSLB #1069085) and certified Trex and TimberTech installer.
  • ●Code-ready installs: 42-inch guards, 4-inch openings and solid posts.
  • ●Every railing type from one team, so you can compare them side by side.
  • ●We build the deck too, so posts are anchored right into the framing.
  • ●Clear, written pricing after a site visit.

Frequently asked questions about railings

On homes in California, guards must be at least 42 inches high where the deck is more than 30 inches above the ground. Guards along the open side of stairs can be at least 34 inches, measured from the stair nosings.

Yes, when it is installed correctly. The cables must be tensioned so a 4-inch sphere cannot pass through any opening, even when the cables are pushed, and the guard must meet the height and strength rules.

Glass gives the clearest view and blocks wind, but it costs more and needs regular cleaning. Cable keeps most of the view, costs less and weighs less. Read our full comparison of cable vs. glass railings.

It depends on the city and the scope. Replacing a railing on an existing deck may not need a permit in some places, while new decks and structural changes do. ION Builders checks the rules for your address.

Aluminum and composite railings need very little care. Glass needs cleaning, cable needs an occasional tension check, and wood needs regular sealing.

Usually, yes. We check that the framing can anchor the new posts, add blocking where needed and install the new railing.

Marine-grade stainless steel cable and hardware, powder-coated aluminum and glass hold up best in salt air. Rinse them now and then to keep them looking new.

Aluminum, steel and glass railings are noncombustible and are good choices in Very High Fire Hazard Severity Zones.

Most railing projects take a few days to two weeks once materials arrive. Glass panels are often made to order, which can add lead time.

We install railings across Los Angeles and Ventura County, including the Hollywood Hills, Studio City, Sherman Oaks, Encino, Woodland Hills, Santa Monica, Venice, Malibu, Pacific Palisades, Brentwood, West Hollywood, Silver Lake, Glendale, Pasadena, Calabasas, Agoura Hills and Thousand Oaks.

Railing Projects by ION Builders Inc

Custom railing systems designed and installed across Los Angeles and Ventura County.

Composite railing with steps
Rooftop deck railing

Ready to Build or Upgrade Your Railings?

Schedule your free consultation today and start creating an outdoor space that feels safer, cleaner, and built around your home.

SCHEDULE YOUR FREE CONSULTATION